How to Roller Paint a Room
If you’re planning to paint walls or entire rooms, a roller is your best option.
Rollers are designed to hold a significant amount of paint, and most come with an attached pan that keeps it off the floor and away from your feet while you work.
This makes them ideal for painting wide surfaces quickly and effectively, which can save you time and hassle during your next painting project.
Step 1: Preparing The Surface
Preparation is key for proper roller painting results. You’ll want to remove all baseboards and doors from your wall, as well as any other furniture you’d like to keep in its place.
It’s also important that you’ve thoroughly prepared your wall by patching any holes or cracks in your drywall, sanding down any rough areas, and priming it with an oil-based primer. Once you’ve finished these tasks, it’s time to move on.
Step 2: Choosing A Good Paint
Choosing your paint is an important step in planning any painting project.
Picking a paint that isn’t compatible with your surface can result in poor adhesion, peeling, and even color discrepancies.
When picking out paint, keep these things in mind: Will it adhere well? What kind of finish does it have? How hard is it to apply? The answers will help you determine if you need oil, latex, or shellac-based paint for your project.
Step 3: Use The Right Tools
If you’re planning to paint walls or entire rooms, a roller is your best option.
Rollers are designed to hold a significant amount of paint and will help you avoid messy drips. When picking out your roller, make sure it’s at least two inches wide; however, for larger rooms (at least 10×12 feet), and even wider roller (2-3 inches) will give you more coverage.
Step 4: Proper Techniques
When you’re roller painting, it’s important to use proper techniques. If you don’t, you could end up wasting paint and your walls could end up looking more like Jackson Pollock painted them.
To ensure your paint doesn’t go to waste and that your walls don’t resemble a three-year-old finger painting, make sure you: Place painter’s tape on all surfaces around where you plan on applying paint.
Step 5: Applying the First Coat
Once you’ve rolled on your primer, you can begin applying your first coat of paint.
Keep in mind that when you roller paint, you’ll be filling in open spaces and wall imperfections—meaning that your first coat won’t be covering everything. This is why it’s so important to put down an even layer of primer.
Step 6: Tips For Faster And Smoother Results
Your roller should be half-full with paint and your room should be evenly lit. Press firmly against your wall, holding the roller at a 45-degree angle, letting gravity pull more paint into your roller.
With smooth strokes, move it up and down over your wall (but don’t press too hard or else you might tear off some paint). To avoid drips, continue rolling until you’ve covered 1/3 of one wall before turning and rolling back over it.
Then repeat on two other walls in different directions. Step back to see if there are any spots that need touch-ups.
Best paint roller for walls
How to roll paint on a wall
1. Preparation of paint tools
2. Choose a paint color
- Basic hue color. The lighter or darker variations still have the same hue.
- VALUE- The lightness or darkness of a color.
- Shades Color– wardrobes with black, dark red, and so on.
- Tints– colors with wardrobe values for white, light blue, and so on.
- Tone- brightness or color intensity blur.
- Flat Paint – This is the standard paint for walls and the lowest gloss level available.
- Satin paint – has a slight sheen and is easier to clean and flatter.
- Semi-Gloss paint – very durable and easy to clean. Ideal for kitchens, bathrooms, and children’s rooms.
- Gloss paint – has a high gloss and is used on areas that are sensitive to dirt. Which one is so good for doors and door frames?
How to paint with a roller
